Expertise - Machinery Directive
 

AVMD2 Machinery Directive



Course Machinery Directive (AVMD2)
      2 day training course covering the Machinery Directive 2006/42/EC
      and CE marking requirements
Why Attend
All machinery suppliers must ensure machinery is safe and CE marked: this means it needs to comply with all relevant directives - specifically the Machinery Directive.
This training deals in detail with CE marking obligations and requirements of the Machinery Directive. The training will take you through performing risk assessments, the Essential Health and Safety Requirements, how to compile a technical file and general CE marking requirements. At the end of this course you will have a good understanding of what your company’s obligations are to comply with CE marking regulations and an understanding of the implications of the UK leaving the EU.
When

20 & 21 April 2020
21 & 22 September 2020

Location
Training facilities in the Macclesfield area.
Who is it for
Importers of machinery, machinery designers, purchasers, mechanical engineers, project managers, machine and control system designers, safety or process engineers.
How is it delivered
The course will consist of a combination of presentations and exercises, providing interactive participation and question and answer sessions. The days will run from 09.00 to 16.30, with refreshments and lunch provided. All participants will receive a certificate of attendance.
Programme

- Introduction and background to CE Marking
- Content of the Machinery Directive
- Risk assessments
- Essential Health and Safety Requirements (EHSRs)
- EN standards
- Electrical safety
- Safety of control systems
- The technical file

How much will it cost: £475 + VAT per delegate
How to book Please ring us on 01625 412542 or
email us at This email address is being protected from spambots. You need JavaScript enabled to view it.


 

Terms And Conditions

Terms and Conditions of Contract

Definitions
"The Company" means amtri veritas.
"The Client" means any person(s), firm, company or body contracting with The Company for any training services.
AV Training Courses
The Company undertakes to provide training services which it believes meet the client's requirements. Qualified personnel will be
assigned as appropriate. Unless expressly agreed otherwise, with the client, amtri veritas shall be entitled to subcontract an accepted
order to third parties. The Client agrees that amtri veritas may bring observers on any course where required for training or improvement
purposes.
Booking training
Application for an amtri veritas training course is effected by completing and submitting the amtri veritas booking form. The booking
can be downloaded from the amtri veritas website or can be requested from our head office.
Payment
Payment should be submitted along with your booking form unless otherwise agreed. Confirmation of booking will be sent within 5
working days of receipt of payment.
Substitutions
A booked delegate may be substituted for another delegate up to 5 working days before the course date. Details of the substitution
must be submitted to and confirmed by amtri veritas.
Transfers
Booked delegates may transfer to another date for the same course free of charge provided notification has been received within 15
working days before the scheduled course date. Transfers within the 15 working days will be subject to a £50+VAT administration fee.
Cancellation
Cancellations received within 15 working days will be subject to full fees.
If the course is oversubscribed or cancelled by the Company due to insufficient numbers, participants will be advised 10 working days in
advance. The company will endeavour to provide a suitable replacement booking.
The company reserves the right to alter or cancel dates or venues and the full fee will be refunded in these cases.
Exclusion of liability
The company reserves the right to cancel a training course, even after the booking has been confirmed. We also reserve the right to
change the venue or time. This shall not constitute grounds for compensation.
The company will do the best of its ability to provide correct and accurate course content and materials.
However, due to the changing nature of regulations and standards, the Company has no liability whatsoever for any loss or damage
suffered.
The company does not accept responsibility for errors or omissions in the technical information that is provided either verbally or in
writing during the training sessions. The company does not accept responsibility for consequential damage or loss.
Fees
The training fees stated are per delegate and include training and documentation. Fees are exclusive of any taxes. Fees may be
subject to alteration and should be confirmed at the time of booking. The fees do not include delegate accommodation or travel.
Facilities & Safety
Course attendees should observe all safety guidelines issued by the Company on arrival to the training. For courses on site at
customer’s premises, the safety responsibilities lie with the customer.
Copyright
It is not allowed to make audio, video or any other form of recording of the training proceedings. Training documents shall not be
duplicated, forwarded, utilised or made available to third parties for unauthorised purposes. Any infringement shall entitle the
Company to seek compensation.
All course materials are copyright of the Company and may not be reproduced in any form or media without the express written
permission of the Company.
The company reserves the right to adjust the content of any course to reflect any new developments.
Training at Clients sites
Where services are to be provided at a site provided by the Client, the client will avail the Company of the following facilities and materials:
a training room, suitable electrical outlets, screen and projector. The client shall ensure that all facilities and equipment comply with
applicable health and safety regulations.
The client shall provide all the necessary insurance cover for any risks involved in relation to the supplied services for the company’s
personnel and/or subcontractors.
Law
This contract shall be subject to the Law of England and Wales. Each party hereby agrees that jurisdiction for the resolution of any dispute
shall be in the Courts of the United Kingdom.

AVIA1 Internal Auditor ISO 19011



Course

AVIA1 Internal Auditor ISO 19011
      This 1-day course covers the requirements for and practice of internal audit of Quality Management systems

 

Why Attend
This training forms part of the performance evaluation of all Quality Management Systems. This training equips staff to carry out focused and effective internal audits and gives practical experience in planning for, conducting, reporting on and improving internal audits
When


  6 August 2020

Location
Training facilities in the Macclesfield area.
Who is it for
Anyone who may be asked to conduct internal audits
How is it delivered
The course consists of presentations, exercises, worked examples and interactive participation with question-and-answer sessions. The day will run from 09.00 to 16.30, with refreshments and lunch provided.
All participants will receive a certificate of attendance.
Programme

- Introduction 
- Internal Audit
- A sample company
- Planning the audit
- Investigating
- Reporting the audit

How much will it cost: £275 + VAT per delegate
How to book Please ring us on 01625 412542 or
email us at This email address is being protected from spambots. You need JavaScript enabled to view it.


 
 
© Copyright amtri veritas